Motors

Image	Description
	622405	Bench Lathe The M.BL Bench Lathe has a high torque, permanent magnet motor that is extremely quiet and smooth running. Cast iron base has mounting holes and suction cup feet for a secure hold on the work surface. Comes with precision machined Tapered Spindles (A-TM-5 and A-TM-6) for holding buffs and wheels up to 4" in diameter. Other accessories including collet holders and wheel mandrels are available. Speed Range: 500-7,000 rpm Width: 13" between spindles . Weight: 7.5 lbs. CE rated.
	622408	Slibe/Poler motor PM sæt med 2 slibekasser Sætte består af motor 622405 og 2 slibekasser 623832. Lille men i forhold til størrelsen, utrolig stærk poler motor fra det Amerikanske firma Foredom. Udstyre med 2 penoler med gevind der gør at de fleste skiver er lige til at skrue på. Enkel at betjene men en on/of knap og trinløs variabel hastighed. Motoren er udstyret med sugekopper i bunden, men kan også monteres med skruger. Variabel hastighed 500-7000 rpm. 200 Watt. Strøm 230V Skive størrelse max: 100 mm. Spindel: højde 100 mm. Max diameter 12mm Mål: Længde 34 x Dybde 18 x Højde 14 cm Vægt: 3,3 Kg Den løse spindel på billedet er udgået.
	622410	KEF 6NE ishing machine. 500 Watt 3000 rpm. with two spindles Ø 6 - 20 Length 580 mm.
	622420	KEF 8NE Polermotor 750 Watt 3000 rpm. with two spindles Ø 6 - 30 Length 620 mm.
	622470	MAP-1 Polishing machine. One speed: 2800 RPM. 500 Watt. Spindles Ø 4 - 14mm. Dimension: 53x12x23,5 cm. 10 kg.
	622480	MAP-2 Polishing machine. Two speed: 1400/2800 RPM. 500 Watt. Spindles Ø 4 - 14mm. Dimension: 53x12x23,5 cm. 10,5 kg.
	622481	Kontakt til slibemaskine
	622485	Polishing machine PM 100 For standard brushes and inserts up to 4" or 102mm. Load bearing side parts made of aluminium with milled bearing seats enable very quiet low-vibration operation. With long, ball bearing mounted main shaft (distance from disc to disc approx. 360mm) and adjustable protective guards to work cleanly with polishing pastes. The right polishing arbor is screwed on and can be removed to use different accessories. Powerful drive through DC motor with speed control (full-wave electronics). For high starting torque and enormous traction even during strong contact pressure. Firm mounting with screws, but also with the attached screw clamp in horizontal or vertical position. Included with the original equipment: 1 each stiff and soft muslin polishing wheel (100 x 15mm) and 1x universal polishing bar (80g). Technical data: 220 - 240V. 140W. 50/60Hz. Variable speed of 1,000 - 3,100rpm. For polishing discs up to a max. of 4" or Ø 102mm. Size L 320, W 220, H 250mm. Weight approx. 5kg. Insulated to class 1.
	623870	Mini polishing bench The machine is equipped with one-speed polishing motor and with inside suction system. On the right side of the machine it is placed the access door to filter chamber which allows the cleaning and the replacement of the two great filters. MINI polishing machine is complete with light and protective anti-failure shield, removable plexiglas screen and suction grate and cone-shaped brush spindle with proper extractor to make its replacement fast and easy. Moreover , it is equipped with safety device for emergency stop placed on the frontal side of the machine. Technical data: 0,50 HP 2800 RPM Suction capacity 600 m3/h. Volt/Hz. 220/50 Watt 400 57x27x38 cm Weight: 20 kg.
	623830	Slibekasse with lys til slibebord
	623832	Mini slibekasse til polermotor Slibekasse med sugeudtag hvor man kan sætte ekstern sug på f.eks. støvsuger.
	622409	Flexslang til Foredom polermotor. Passer til polermotor 622405 og til håndstykker med USA koblinger.
	622440	Spindel løs venstre Passer til slib / polermotor KEF 6NE
	622445	Spindel løs højre Passer til slib / polermotor KEF 6NE
	622450	Spindel løs venstre Passer til slib / polermotor KEF 8NE
	622455	Spindel løs højre Passer til slib / polermotor KEF 8NE
	622494	Løs spindel til map højre. Passer til MAP 1 og 2
	622495	Løs spindel til map venstre. Passer til MAP 1 og 2
	622496	Spindel ekstra lang højre Passer til slibe / polermotor map 1 - 2
	622497	Spindel ekstra lang venstre Passer til slibe / polermotor map 1 - 2
	622498	Konisk spindel m.skaft Konisk spindel: længde 50mm x 15,44 Ø mm på det tykkeste sted. Længde. 70 mm ialt. Skaft længde: 19,74 mm x 9,65Ø mm
	623860	Kradsmotor Kradsmotor med ekstra langspindel. Længde på akslen er 220 mm og 22 Ø diameter. Spindlen stiger fra 4 Ø - 18 Ø mm. Omdr. pr. min. 670. 230 volt. Vægt 7 kg.
	623840	Kradskasse
	623850	Hane til kradskasse with gevind Mål:85 mm.