Carbide cutter
Skafterne er 2,34 mm
| Image | Description | |
|---|---|---|
  |
 |
|
| 613424 |
Tungsten carbide cutterShape: cone square, rounded.
X-cut, medium. For non precious alloys, acrylics. Ø 1,4 mm. Meisinger: HM 23MG 014 |
|
 |
|
|
| 613428 |
Tungsten carbide cutterShape: cone square, rounded.
X-cut, medium. For non precious alloys, acrylics. Ø 2,3 mm. Meisinger: HM 23MG 023 |
|
 |
|
|
| 613481 |
Tungsten carbide cutterShape: flame, rounded.
X-cut, medium. For non precious alloys, acrylics. Ø 2,3 mm. Meisinger: HM 73MG 023 |
|
 |
|
|
| 613482 |
Tungsten carbide cutterShape: flame, rounded.
Special toothing for titanium, ultra fine. For final work on titanium and titanium alloys prior to polishing. Ø 2,3 mm. Meisinger: HM 73UT 023 |
|
 |
|
|
| 613410 |
Tungsten carbide cutterShape: round.
Ø 2,5 mm. Single cut. For laboratory. Max rpm: 50.000 Meisinger: HM 71 025 |
|
| 613412 |
Tungsten carbide cutterShape: round.
Ø 3,1 mm. Single cut. For laboratory. Max rpm: 50.000 Meisinger: HM 71 031 |
|
| 613414 |
Tungsten carbide cutterShape: round.
Ø 4,0 mm. Single cut. For laboratory. Max rpm: 50.000 Meisinger: HM 71 040 |
|
| 613416 |
Tungsten carbide cutterShape: round.
Ø 5,0 mm. Single cut. For laboratory. Max rpm: 50.000 Meisinger: HM 71 050 |
|
 |
|
|
| 613418 |
Tungsten carbide cutterShape: round.
Ø 5,0 mm. X-cut, medium. For non precious alloys, acrylics. Max rpm: 40.000 Meisinger: HM 71GX 050 |
|
 |
|
|
| 613455 |
Tungsten carbide cutterShape: flame, rounded.
X-cut, coarse. For acrylic and plaster. Ø 6,0 mm. Meisinger: HM 251HX 060 |
|
 |
|
|
| 613473 |
Tungsten carbide cutterShape: flame, rounded.
For acrylic and plaster. X-cut, medium. Ø 4,0 mm. Meisinger: HM 250GM 040 |
|
 |
|
|
| 613471 |
Tungsten carbide cutterShape: flame, rounded.
For trimming of hard materials and for obtaining especially smooth surfaces. Ø 6 mm. Plain cut, medium. Meisinger: HM 251 060 |
|
| 613472 |
Tungsten carbide cutterShape: flame, rounded.
For trimming of hard materials and for obtaining especially smooth surfaces. Ø 7 mm. Plain cut, medium. Meisinger: HM 251 070 |
|
 |
|
|
| 613461 |
Tungsten carbide cutterShape: flame, rounded.
For acrylic and plaster. Ø 6,0 mm. X-cut, medium. Meisinger: HM 251GM 060 |
|
 |
|
|
| 613490 |
Tungsten carbide cutterShape: flame, rounded.
For trimming on all alloys and hard acrylics. Ø 6 mm. Cut length: 14,7 mm. Cross cut. Max rpm: 30.000 Meisinger: HM 251FQ 060 |
|
 |
|
|
| 613470 |
Tungsten carbide cutterShape: flame, rounded.
For trimmingof hard alloys, acrylics and ceramics. Ø 4 mm. Cut length: 9,3 mm. X-cut, fine. Max rpm: 50.000 Meisinger: HM 251FX 040 |
|
| 613480 |
Tungsten carbide cutterShape: flame, rounded.
For trimmingof hard alloys, acrylics and ceramics. X-cut, fine. Ø 6 mm. Cut length: 14,7 mm. X-cut, fine. Max rpm: 30.000 Meisinger: HM 251FX 060 |
|
 |
|
|
| 613520 |
Tungsten carbide cutterShape: point, rounded
For trimming of hard materials and for obtaining especially smooth surfaces. Ø 6 mm. Cut length: 14,7 mm. Plain cut, medium. Max rpm: 30.000 Meisinger: HM 416 060 |
|
 |
|
|
| 613521 |
Tungsten carbide cutterShape: point, rounded.
For trimming non-precious alloys and acrylics. Cut length: 14,7 mm. Ø 6 mm. Plain cut, medium. Meisinger: HM 416GX 060 |
|
 |
|
|
| 613510 |
Tungsten carbide cutterShape: cone square, rounded.
For precious alloys. Ø 6 mm. Cut length: 12,7 mm. Plain cut, medium. Max rpm: 30.000 Meisinger: HM 79 060 |
|
 |
|
|
| 613440 |
Tungsten carbide cutterShape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics. Ø 4 mm. Cut Length: 14,2 mm. X-cut, fine Max rpm: 50.000 Meisinger: HM 79FX 040 |
|
| 613450 |
Tungsten carbide cutterShape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics. Ø 4,5 mm. Cut Length: 12,7 mm. X-cut, fine Max rpm: 50.000 Meisinger: HM 79FX 045 |
|
| 613460 |
Tungsten carbide cutterShape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics. Ø 6 mm. Cut Length: 12,7 mm. X-cut, fine Max rpm:30.000 Meisinger: HM 79FX 060 |
|
 |
|
|
| 613477 |
Tungsten carbide cutterShape: Conical wax milling cutters, rounded end.
Ø 2,3mm. Meisinger: HM 496KR 023 |
|
| 613478 |
Tungsten carbide cutterShape: Conical wax milling cutters, rounded end.
Ø 3,1mm. Meisinger: HM 496KR 031 |
|
| 613479 |
Tungsten carbide cutterShape: Conical wax milling cutters, rounded end.
Ø 4,0mm. Meisinger: HM 496KR 040 |
|
 |
|
|
| 613451 |
Tungsten carbide cutterShape: cone, rounded.
For trimming of acrylics and plaster. Ø 6,0 mm. X-cut, coarse. Meisinger: HM 79HX 060 |
|
 |
|
|
| 613452 |
Tungsten carbide cutterShape: cone, rounded.
For trimming of acrylics and plaster. Ø 7,0 mm. X-cut, coarse. Meisinger: HM 79HX 070 |
|
 |
|
|
| 613454 |
Tungsten carbide cutterShape: cone, rounded.
X-cut, medium. For non precious alloys, acrylics. Ø 6,0mm. Cut length: 12,7mm. Meisinger: HM 79GX 060 |
|
 |
|
|
| 613421 |
Tungsten carbide cutterShape: point, rounded.
X-cut, medium. For non precious alloys, acrylics. Cut length: 11,5mm. Meisinger: HM 138GX |
|
 |
|
|
| 613530 |
Tungsten carbide cutterShape: point, rounded.
X-cut, medium. For precious alloys and acrylics. Cut length: 4,2mm. Meisinger: HM 23SRX 010 |
|
 |
|
|
| 613422 |
Tungsten carbide cutterShape: cylindrical pointed.
X-cut, medium. For non precious alloys, acrylics. Ø 23mm. Cut length: 14mm. Meisinger: HM 487 GX 023 |
|
 |
|
|
| 613423 |
Tungsten carbide cutterShape: cylindrical point rounded.
Special toothing for titanium, medium. For speedy work on titanium and titanium alloys. Ø 2,3mm. Cut length: 14mm. Meisinger: HM 486 GT 023 |
|
 |
|
|
| 613441 |
Tungsten carbide cutterShape: cylindrical point rounded.
Special toothing for titanium, ultra fine. For final work on titanium and titanium alloys prior to polishing. Ø 2,3mm. Cut length: 14mm. Meisinger: HM 486UT 023 |
|
 |
|
|
| 613442 |
Tungsten carbide cutterShape: cylindrical point rounded.
Special toothing for titanium, extra fine. For extra fine, difficult work on titanium and titanium alloys. Ø 2,3mm. Cut length: 14mm. Meisinger: HM 486ET 023 |
|
 |
|
|
| 613443 |
Tungsten carbide cutterShape: cylindrical pointed.
X-cut, medium. For non precious alloys, acrylics. Cut length: 14mm. Ø 2,3 mm. Meisinger: HM 487GX 023 |
|
 |
|
|
| 613474 |
Tungsten carbide cutterShape: cylinder, rounded end.
For precious alloys. Plain cut, medium. Ø 6mm. Meisinger: HM 72 060 |
|
 |
|
|
| 613475 |
Tungsten carbide cutterShape: rounded cylinder.
For precious alloys. Ø 6 mm. Plain cut, medium. Max rpm: 30.000 Meisinger: HM 73 060 |
|
 |
|
|
| 613476 |
Tungsten carbide cutterShape: cylinder.
For trimming of non-precious alloys and acrylics. X-cut, medium. Ø 40mm. Meisinger: HM 296GX 040 |
|
 |
|
|
| 613425 |
Tungsten carbide cutterShape: cylinder square,
cross cut. Ø 2,1mm. Shank: Ø 2,3mm. Cut length: 5,1 mm. Max rpm: 50.000 Meisinger: HM 31 021 |
|
| 613426 |
Tungsten carbide cutterShape: cylinder square,
cross cut. Ø 2,3mm. Shank: Ø 2,3mm. Cut length: 5,1 mm. Max rpm: 50.000 Meisinger: HM 31 023 |
|
 |
|
|
| 613400 |
Tungsten carbide cutterShape: cylindrical, side and end cutting.
Plain cut, medium. Ø 6,0 mm. Cut length: 13,7 mm. For effective triming of hard meterials and for obtaining especially smoth surfaces. Max rpm: 30.000 Meisinger: HM 21 060 |
|
 |
|
|
| 613456 |
Tungsten carbide cutterShape: cylindrical, side and end cutting.
Ø 6mm. X-cut, fine. Max rpm: 30.000 Meisinger: HM 175FX 060 |
|
 |
|
|
| 613560 |
Tungsten carbideSpear drill.
Overall length: 130 Ø 0,6 Max rpm: 30.000 Meisinger: HM 202 006 |
|
| 613565 |
Platbor carbide MeisingerSpear drill.
Overall length: 130 Ø 0,7 Max rpm: 30.000 Meisinger: HM 202 007 |
|
| 613570 |
Platbor carbide MeisingerSpear drill.
Overall length: 130 Ø 0,8 Max rpm: 30.000 Meisinger: HM 202 008 |
|
 |
|
|
| 613540 |
Typhoon cutterShape: flame.
Ø 7,5mm. Cut length: 18,5mm. |
|
 |
|
|
| 613541 |
Typhoon cutterShape: cylindrical.
Ø 8mm. Cut length: 13,5mm. |
|
 |
|
|
| 613542 |
Typhoon cutterShape: cylindrical, rounded end.
Ø 8mm. Cut length: 15,5mm. |
|
 |
|
|
| 613543 |
Typhoon cutterShape: flame.
Ø 9,5mm. Cut length: 15mm. |
|
 |
Frits Pedersen · Haraldshus, Vermundsgade 38B, st. th. · 2100 København Ø · Denmark Tel.: +45 35 43 11 11 · Fax: +45 35 43 33 44 · fp@frits.dk · www.frits.dk © 1996-2026 · http://old.frits.dk/varktoj.asp · 08-05-2026 05:25:03 |